There are a lot of operators who have just entered the industry are asking what does it mean to test the tool of the CNC CNC machining center, and today the editor of the five machine tools will share with you the experience of trying the tool:
1. When the tool is moved to the surface of the workpiece 30 to 50mm during the tool test of the CNC CNC machining center, it is necessary to confirm the coordinate value of the X and Y axes and the residual axis of the coordinate axis to keep the feed and mode consistent.
Second, the tool that needs to test the cutter, first test the length of the drilled hole. After passing the test, when it can be up to the entire length. Tool data using the progressive method tool radius compensation feature can be modified from large to small.
3. When the CNC machining center program is modified, it is necessary to carefully check and calculate the modified parts.
Fourth, when searching for the program, we should pay attention to whether the cursor pointing position is reasonable and accurate, and observe whether the tool coordinates and the movement direction of the CNC machining center are correct.
5. In the process of tool testing or machining of CNC machining center, after replacing the tool, re-measure the length of the tool and modify the tool compensation value and tool compensation number.
6. When performing manual continuous feed and manual feed operations, check whether the position of each switch is correct, positive and negative directions, and then press the button before the equipment is operated.