1. Regular inspection and fault diagnosis
Follow the instruction manual of the equipment and perform a comprehensive inspection of the mechanical, electrical and transmission parts.
Familiar with equipment operation processes and control procedures in order to better locate the cause of failure.
2. Cleaning and maintenance
Regularly clean the dust and debris inside and outside the equipment to avoid unnecessary impact on the equipment.
Regular oil changes and lubrication maintenance can extend the service life of the equipment. Please use the type of grease specified in the equipment manual, and change the lubricating oil regularly to prevent the grease from aging or expiration.
3. Fastener and wiring inspection
Check whether all the fasteners such as installation screws of the automatic production line are firm, and tighten them in time if they are loose.
Check the connection of all the connecting wires to make sure that the connection is good and there is no loosening.
4. Appearance and testing
Before the start of daily work, test the automated production line to check whether its functions are normal to ensure the stable operation of the production line.
Check the appearance of the automated production line to ensure that its surface is clean, free of dirt and debris, and pay special attention to avoid chemicals, industrial waste, etc. from touching the surface of the equipment to prevent corrosion damage.
5. Professional training and safety awareness
Regular training is provided to maintenance personnel to improve their skill level and safety awareness to ensure the effectiveness of maintenance.




