NTH High Precision Gantry CNC Machining Center
3 Axis Gantry Machining Center
3 Axis Gantry Machining Center is a CNC machining equipment with a gantry structure. It realizes three-dimensional machining of workpieces through linkage control in three linear directions: X-axis (table moves forward and backward), Y-axis (slide moves left and right) and Z-axis (spindle moves vertically up and down). The equipment structure consists of a fixed crossbeam, a mobile slide, a vertical spindle and a table. It has the ability to process medium and large parts and is suitable for multi-faceted machining of planes, holes, grooves, etc. under one clamping condition. It is widely used in mold manufacturing, mechanical structural parts and other metal processing scenarios to meet the efficient cutting needs of conventional geometric contours.
Features
Stable and reliable machining accuracy
The 3 Axis Gantry Machining Center adopts a high-rigidity gantry structure design, with precision linear guides and ball screw transmission systems. The positioning accuracy of the X/Y/Z axes reaches 0.004mm, and the repeat positioning accuracy is controlled at 0.002mm, which can meet the contour and hole system processing requirements of high-precision parts.
Supports large-size workpiece processing with high loads
This series of equipment is equipped with a high-strength worktable, supporting a maximum size of 1700×1300mm (model NTH1680), with a load capacity of up to 3000kg, suitable for stable clamping and multi-faceted processing of large-size heavy parts. The large table structure plus the long axial travel (maximum X-axis 1600mm, Y-axis 1500mm, Z-axis 800mm) enables the main processing surface of most complex parts to be completed in one clamping.
High speed and high power output capability
The 3 Axis Gantry Machining Center is equipped with an HSK A63 spindle interface, with a maximum speed of 10,000 rpm (optionally 20,000 rpm), and a spindle power of 22/26 kW, which has strong heavy cutting capabilities. The spindle adopts a large-diameter ceramic bearing structure, combined with an oil-gas lubrication system and an internal spindle cooling structure to achieve high speed and high stability compatibility.
High tool change efficiency
The equipment is equipped with a 24/30/40-position tool magazine (optional), using a servo-controlled tool arm tool change system, with a maximum tool diameter of 80mm (full tool in adjacent position) or 150mm (empty tool in adjacent position), short automatic tool change time, and high system stability. The tool system supports a maximum tool length of 300mm and a weight of 8kg, covering common tool configurations required from roughing to finishing. The typical tool change time is less than 2.5 seconds, and the tool identification and positioning error is less than 0.003mm.
Technical Data:
|
Item |
Unit |
NTH1250 |
NTH1680 |
|
Stroke |
|||
|
X axis |
mm |
1200 |
1600 |
|
Y axis |
mm |
1200 |
1500 |
|
Z axis |
mm |
500 |
800 |
|
Table |
|||
|
Table size |
mm |
1300x1250 |
1700x1300 |
|
Table load capacity |
kg |
1500 |
3000 |
|
Spindle |
|||
|
Spindle type |
HSK A63 |
HSK A63 |
|
|
Spindle max speed |
rpm |
10000 |
10000 |
|
Spindle max speed(optional) |
rpm |
20000 |
20000 |
|
Spindle power |
Kw |
22/26 |
22/26 |
|
Feed Rate |
|||
|
X/Y/Z axis rapid |
m/min |
30 |
30 |
|
Tool Magazine |
|||
|
Capacity |
24/30/40 |
24/30/40 |
|
|
Max tool diameter |
mm |
80/150 |
80/150 |
|
Max tool length |
mm |
300 |
300 |
|
Max tool weight |
kg |
8 |
8 |
|
Accuracy (VDI) |
|||
|
X/Y/Z positioning |
mm |
0.004 |
0.004 |
|
X/Y/Z repeatability |
mm |
0.002 |
0.002 |
Hot Tags: 3 axis gantry machining center, China 3 axis gantry machining center manufacturers, suppliers, factory, Moving Column Gantry Machining Center, Electric Car Motor Housing, Automotive Chassis Production Line, Automobile Caliper Part, Production Line Process Upgrade, Gantry Robot Arm










