Moving Column Gantry Machining Center

Moving Column Gantry Machining Center

NGM series of machine tools uses large-section beams and slides, and the X-axis uses double-sided dual-motor anti-backlash drive, with good overall rigidity.

Product Introduction

Move Column Type Gantry CNC Machining Center

 

Moving Column Gantry Machining Center is a CNC machining equipment with a gantry structure. It is mainly composed of a fixed bed, a movable worktable, a vertical slide and a spindle assembly. It can process workpieces in the three linear axis directions of X, Y and Z, and is suitable for processing medium and large workpieces.

 

 

Features

 

High-precision spindle and ram design
This machine adopts high-precision spindle combined bearings, combined with the ram and reducer separation design to reduce spindle vibration and mechanical transmission error. The separated ram design keeps the spindle radial runout within 3 microns, which is better than the 5-micron error of the traditional integrated design. The two-stage gear automatic shifting realizes the switching between low-speed high torque and high-speed processing, meeting the requirements of rough and fine processing, and the repeat positioning accuracy reaches ±0.005 mm.

 

Fixed workbench and mobile gantry structure
Adopting a fixed workbench and an integral mobile gantry design, the workbench has a load capacity of over 10 tons and supports workpiece sizes of over 4 meters × 2 meters. The structure is strong in rigidity, and the X-axis adopts a dual-motor dual-drive anti-backlash design to improve transmission stability. The overall rigidity is increased by 25% compared with traditional single-motor models. This layout effectively avoids deformation and clamping errors caused by the weight of large workpieces, meeting the high load and high rigidity requirements of shipbuilding, rail transportation and heavy machinery processing.

 

Multi-axis linkage and efficient transmission system
The machine tool supports 4/5-axis linkage and has the ability to process complex curved surfaces. The spindle speed can reach 20,000 rpm and the maximum cutting feed speed can reach 30 m/min, far exceeding the traditional three-axis machine. The mechanical transmission adopts high-rigidity gear drive, and the gear shift is smooth, which ensures the stability of precision during high-speed processing and meets the mass production requirements of complex structural parts such as aviation and automotive parts.

 

Dynamic moving column design
The dynamic moving column structure design, the gantry and spindle move with the workpiece, the workbench is fixed, the loading and unloading space is optimized, and the operation convenience is improved. The loading and unloading time is reduced by about 15% compared with the fixed column model, which improves the efficiency of the production line. This structure supports customers to customize fixtures according to the characteristics of the workpiece to improve processing accuracy and repeatability. The flexible space layout and customization capabilities make it widely applicable, especially suitable for the flexible manufacturing needs of large quantities and diversified parts.

 

Moving Column Gantry Machining Center

 

 

Hot Tags: moving column gantry machining center, China moving column gantry machining center manufacturers, suppliers, factory, Double Vertical Beam Roller Gantry, 3 Axis Vertical Machining Center, New Energy Vehicles Production Line, Electric Car Motor Housing, Gantry Machining Center with Moving Table, Horizontal Milling Center

Send Inquiry

whatsapp

Phone

E-mail

Inquiry

Bag